Indesit IO 632 CC RFH Kullanım Talimatları Kılavuzu - Sayfa 7

Hob Indesit IO 632 CC RFH için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Indesit IO 632 CC RFH 20 sayfaları.

Sayfayı Yazdır

4. Set the cooking duration using the

buttons.

5. Conﬁ rm by pressing the

selection occurs after 10 seconds.

The timer begins counting down immediately.

A buzzer sounds for approximately 1 minute and the

cooking zone switches off when the set programme has

ﬁ nished.

Repeat the above procedure for each hotplate you wish

to programme.

Using multiple programmes and the display

If one or more hotplates are programmed, the display

will show the data for the hotplate with the least time

remaining, and the light corresponding to the position of

the hotplate will ﬂ ash. The lights corresponding to the

other hotplates programmed will be switched on.

To visualise the time remaining for the other

programmed hotplates, press the

repeatedly: the time remaining for each hotplate will be

shown sequentially in a clockwise order,

starting from the front left hotplate.

Changing the programme

1. Press the

button repeatedly until the duration

you wish to change is shown.

2. Use the

buttons to set the new duration.

3. Conﬁ rm by pressing the

To cancel a programme, follow the above instructions.

At step 2, press the

button: the duration decreases

progressively until it reaches 0 and switches off. The

programme resets and the display exits programming

mode.

Timer

The hob must be switched on.

The timer can be used to set a duration up to 99

minutes.

1. Press the

programming button until the timer

indicator light is illuminated

2. Set the desired duration using the

3. Conﬁ rm by pressing the

The timer begins counting down immediately. When the

time has elapsed, a buzzer will sound (for one minute).

and

button or automatic

button

button.

and

buttons.

button.

Control panel lock

When the hob is switched on, it is possible to lock the

oven controls in order to avoid accidental changes

being made to the settings (by children, during cleaning,

etc.). Press the

button to lock the control panel:

the indicator light above the button will switch on.

To use any of the controls (e.g. to stop cooking), you

must switch off this function. Press the

few moments, the indicator light will switch off and the

lock function will be removed.

Switching off the hob

Press the button

to switch off the appliance - do not

rely solely on the pan sensor.

If the control panel lock has been activated, the controls

will continue to be locked even after the hob is switched

on again. In order to switch the hob on again, you must

ﬁ rst remove the lock function.

"Demo" mode

It is possible to set the hob to a demonstration mode

where all the controls work normally but the heating

elements do not switch on. To activate the "demo" mode

the hob must be switched on, with all the hotplates

switched off.

• Press and hold the

and

for 6 seconds. When the 6 seconds have elapsed,

the ON/OFF and CONTROLS LOCKED indicator

lights will ﬂ ash for one second. Release the

buttons and press the

• The display will show the text DE and MO and the

hob will be switched off.

• When the hob is switched on again it will be set to

the "demo" mode.

To exit this mode, follow the procedure described

above. The display will show the text DE and OF and

the hob will be switched off. When it is next switched

on, the hob will function normally.

button for a

buttons simultaneously

and

button;