AEG 220 D Kurulum ve Kullanım Talimatları Kılavuzu - Sayfa 15

Havalandırma Davlumbazı AEG 220 D için çevrimiçi göz atın veya pdf Kurulum ve Kullanım Talimatları Kılavuzu indirin. AEG 220 D 17 sayfaları. Fume extractor hood

Removing the filter
Open the grid and remove the stops M to take out the
filter. See Fig. 6.

Carbon filter

The activated carbon filter should only be used if you
want to use the hood in its filtering function.
To do this you will need an original AEG activated carbon
filter (see special accessories).
This filter cannot be cleaned or reused.
As a general rule, the activated carbon filter should
be changed once every four months.
Mounting – Fig 7
a. Fit first rearwards on the proper seats.
b. Then fix frontwards the carbon filter using hooks C.
Dismounting :
Unhook the carbon filter from its housing pushing hooks C.
7
Always specify the hood model code number and serial
number when ordering replacement filters. This
information is shown on the registration plate located on
the inside of the unit.
The activated carbon filter can be ordered from the AEG
technical assistance service.
C
C
31