AEG 220 D Посібник з монтажу та експлуатації - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Вентиляційна витяжка AEG 220 D. AEG 220 D 17 сторінок. Fume extractor hood

Друкувати сторінку

Removing the filter

Open the grid and remove the stops M to take out the

filter. See Fig. 6.

Carbon filter

The activated carbon filter should only be used if you

want to use the hood in its filtering function.

To do this you will need an original AEG activated carbon

filter (see special accessories).

This filter cannot be cleaned or reused.

As a general rule, the activated carbon filter should

be changed once every four months.

Mounting – Fig 7

a. Fit first rearwards on the proper seats.

b. Then fix frontwards the carbon filter using hooks C.

Dismounting :

Unhook the carbon filter from its housing pushing hooks C.

Always specify the hood model code number and serial

number when ordering replacement filters. This

information is shown on the registration plate located on

the inside of the unit.

The activated carbon filter can be ordered from the AEG

technical assistance service.