Kohler VEIL HT200 PNE IWT Kurulum Talimatları Kılavuzu - Sayfa 18

Sıhhi Tesisat Ürünleri Kohler VEIL HT200 PNE IWT için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Kohler VEIL HT200 PNE IWT 30 sayfaları. Wall-hung toilet

Sayfayı Yazdır

2. Tighten the long screw into the holes of the tank bracket

and cover the drainage hole with the big cap, cover the

inlet hole with the small cap.

3. When finishing the brickwork of the wall, take out the big

and small caps, and eliminate unwanted mask with a sharp

knife, if there is mask.

Note:

Reserve access panel at front or top of the tank.

D. Installation of Toilet

1. Install the inlet pipe to the lavatory as shown, and mark on

the pipes at the back side of the tank with a ruler and a

pencil, and reserve appropriate space according to the

distance from the back of the tank to the inlet hole on the

wall.

2. Eliminate unwanted part of the inlet pipe according to the

marks of reserved space ,and rasp a smooth surface with

files.

1402749-T01-A

Water Inlet

Drainage Hole

Big Cap

Mask

Inlet Pipe

Drainage Pipe

Reserved Space

Drainage Pipe

-11-

Small Cap

Long Screw

Water Tank Bracket

Access Panel

Small Cap

Big Cap

Inlet Pipe