AEG LAVATHERM 57810 Kullanıcı Bilgileri - Sayfa 19

Kurutucu AEG LAVATHERM 57810 için çevrimiçi göz atın veya pdf Kullanıcı Bilgileri indirin. AEG LAVATHERM 57810 32 sayfaları. Condensation dryer
Ayrıca AEG LAVATHERM 57810 için: Kullanıcı Bilgileri (32 sayfalar)

Sayfayı Yazdır

1. Open loading door

2. Open base door. To do this, press

the release button on the bottom

of the loading opening and open

the door to the left.

3. Remove lint from the inside of the

door and the heat exchange cham-

ber. Wipe the door seal with a

damp cloth.

4. Turn both lock washers inwards.

5. Use the handle to pull the heat ex-

changer out of the base and carry

it horizontally to prevent any re-

maining water from spilling.

6. To empty the heat exchanger, hold

vertically over a washing-up bowl.

Caution! Do not use sharp objects

to clean. The heat exchanger could

develop leaks.

7. Clean heat exchanger.

It is best to use a brush or to rinse thoroughly with a shower head.

8. Replace heat exchanger and lock into place (turn both lock washers

outwards until they snap into place).

9. Close base door.

The dryer will not operate if the HEAT EXCHANGER (WARMTEWISSE-

LAAR) indicator is still lit.

Caution! Never operate the dryer without the heat exchanger.