AEG TR8TRIER Kullanıcı Kılavuzu - Sayfa 20
Kurutucu AEG TR8TRIER için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG TR8TRIER 32 sayfaları.
Sayfayı Yazdır1. Turn the appliance on.
2. Select 1 of the available programmes.
3. Touch and hold down Stil and Opfrissen
buttons at the same time.
One of 2 configurations is possible:
• the watertank indicator:
symbol
container indicator is permanently
activated
• the watertank indicator:
symbol
container indicator is permanently
deactivated
9.4 Operating hours counter
This function gives a possibility to display the
total operating time of the appliance in hours,
which is counted from the moment it is first
switched on. The actual operating time of the
cycles is shown (does not include pauses or
delayed start time).
To visualise this value, proceed as follows:
1. Switch the appliance on by pressing the
Aan/Uit button.
2. Press and hold the Droogtegraad and
Droogtijd buttons for some seconds.
3. After 3 seconds the total hours operated
by the appliance are shown in the display:
e.g. if the operating time is 1276 hours,
the display shows the text Hr for 2
10. CARE AND CLEANING
10.1 Cleaning the filter
At the end of each cycle the
comes on the display and you must clean the
filter.
The filter collects the lint during the
drying cycle.
20
ENGLISH
is on if the
appears - the water
is off if the
appears - the water
filter symbol
seconds then 12 for 2 seconds followed
by 76. This value is displayed with a
sequence of two digits at a time: the first
two digits indicate thousands and
hundreds, the second two digits indicate
tens and units.
To exit this mode, either press any button,
turn the selector knob or switch the appliance
off.
9.5 Factory Defaults
This function allows to restore the factory
default settings. The saved options and
working modes will be reset.
To activate this option follow steps below:
1. Switch the appliance on by pressing
Aan/Uit button.
2. Wait approximately 8 seconds.
3. Press and hold the + Antikreuk and Stil
buttons for some seconds.
4. The appliance will acknowledge the
operation by displaying
If the procedure does not work (this could
be due to timeout or wrong keys
combination), switch the appliance off
and repeat the sequence from the
beginning.
To achieve the best drying performance
clean the filter regularly. The clogged
filter causes the longer drying cycle and
as a consequence the energy
consumption increase.
Clean the filter by hand. Use a vacuum
cleaner if necessary.
CAUTION!
Do not use the water to clean the filter.
Manually gather lint and throw it away
into the dustbin (avoid throwing the
plastic fibres into the water environment).
.