Kohler Magnum 20 HP Kullanıcı El Kitabı - Sayfa 4

Motor Kohler Magnum 20 HP için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Kohler Magnum 20 HP 17 sayfaları. Horizontal crankshaft
Ayrıca Kohler Magnum 20 HP için: Kullanıcı El Kitabı (17 sayfalar)

Sayfayı Yazdır

Identification Plate

(On Engine Shrouding)

Air Cleaner

Air Intake Screen

Figure 1. Typical M18 Engine.

Oil Recommendations

Using the proper type and weight of oil in the

crankcase is extremely important. So is checking oil

daily and changing oil and filter regularly. Failure to

use the correct oil, or using dirty oil, causes

premature engine wear and failure.

Before each start, make sure the crankcase is filled

with proper type and quantity of oil.

Oil Type

Use high quality detergent oil of API (American

Petroleum Institute) service class SG, SH, SJ or

higher. Select the viscosity based on the air

temperature at the time of operation as shown in the

following table.

*Use of synthetic oil having 5W-20 or 5W-30 rating is acceptable,

up to 4

C (40

F).

**Synthetic oils will provide better starting in extreme cold below

-23

C (-10

F).

Figure 2. Viscosity Grades Table.

Mufflers

Blower

Housing

Dipstick

Spark

Plug

Cooling

Fins

Oil Filter

Oil Drain

Straight 30-weight (Kohler ''Magnum'') oil is

preferred. SAE 10W-30 oil is not recommended above

32°F (0°C). Using this oil substantially increases oil

consumption and combustion chamber deposits.

NOTE: Using other than service class SG, SH, SJ or

higher oil or extending oil change intervals

longer than recommended can cause engine

damage.

A logo or symbol on oil containers identifies the API

service class and SAE viscosity grade. See Figure 3.

Figure 3. Oil Container Logo.

Refer to "Maintenance Instructions" beginning on

page 7 for detailed oil check, oil change, and oil

filter change procedures.

Oil Fill

Spark

Plug

Electric

Starter

Oil Sump