acaia Pearl S Kullanıcı Kılavuzu - Sayfa 14

Terazi acaia Pearl S için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. acaia Pearl S 18 sayfaları. Coffee scale
Ayrıca acaia Pearl S için: Kullanıcı Kılavuzu (20 sayfalar), Kullanıcı Kılavuzu (20 sayfalar)

Sayfayı Yazdır

Bluetooth setting

1. By default, the Bluetooth Setting is set to ON, which means the Bluetooth is enabled.

• ON: The Bluetooth is enabled. The scale allows Bluetooth connection. The user may connect

the scale with Acaia apps.

• OFF: The Bluetooth is disabled. The scale does not allow any Bluetooth connection.

Sleep timer setting

1. The number displayed indicates the amount of time before the scale will automatically power

off. For example, when 10 is selected and the scale is disconnected from all mobile devices, the

scale will power off after 10 minutes of idling.

Battery saving

1. The default Power Saving Mode is set to 90 seconds.

2. The Acaia Pearl Model S will wait for the selected number of seconds to enter Power Saving

Mode. The LED display will dim to save power.

Weighing Filter setting

1. The Weight Filter Setting determines the speed for load receptor to response to weight and to

determine the weighing value. The higher level, the more stable but slower the weighing result

will be.

Zero tracking

1. Zero tracking is a function to help compensate the weight readout fluctuations at zero point to

improve the usability of the scale. Acaia Pearl S is allowed to compensate the fluctuation by up

to 2 d according to industrial weighing guidelines.

2. OFF: It is not recommended to turn off zero tracking as the zero indication would drift easily as

the room temperature changes.

3. 0.5 d~3 d: For example, since each division is 0.1 g, 3 d = 0.3 g. When zero tracking is set to

be 3 d, any initial weight between +/- 0.3 g on the weighing pan would be zeroed out.

4. 1 d is recommended in general for Acaia coffee scale

Weighing resolution

1. The default weighing resolution is set to [ Default ], the division is 0.1 g for weights under 1000

grams and 0.5 g for weights between 1000 and 2000 grams.

2. When the weighing resolution is set to [ High ], the division will be 0.1 g throughout the entire

time from 0 to 2000 grams.

Timer auto reset

1. When the timer is paused, the scale will automatically reset the timer to zero after a defined

length of time.

2. The default value for this setting is ten seconds.

Reset default

To reset the scale to its factory default settings, go to [ Reset Default ], then choose [ Yes ]. The

scale will clear Hello Message and reset all settings including Brewguide data to factory default.