Dexter Laundry COIN COMPACT DRYER Operatör El Kitabı - Sayfa 13

Kurutucu Dexter Laundry COIN COMPACT DRYER için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Dexter Laundry COIN COMPACT DRYER 17 sayfaları.

Sayfayı Yazdır

TO CHANGE PROGRAMMED VALUES OR ZERO REGISTERS

1. Open the loading door.

2. Unlock the control tray, carefully slide the control tray assembly forward about three

inches. Press the program switch. (See Figure 4 "Top View of Controller") Reinstall

and lock the controller.

The controller is now in the program mode at the "00" step, displaying the hours run by

the lower drum. (Refer to the table defining the steps.)

This value displayed can be reset to "0" or observed and left as is: Pressing the START

switch will advance the controller through the fifteen remaining steps allowing

observation or alteration.

Note that on any program change or reset it is necessary to advance to the next step by

pressing the START switch to enter the revision. Otherwise the value will remain as it

was before the alteration.

Figure 4 - Top View of Controller