AAxeon FCM-CHS2 Series Kullanıcı Kılavuzu - Sayfa 9

Şasi AAxeon FCM-CHS2 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AAxeon FCM-CHS2 Series 16 sayfaları. 16-slot in-band management chassis

Sayfayı Yazdır

2. INSTALLATION

The procedures for installing the In-Band Management Chassis is as follows,

2.1 Requirement

2.2 Unpacking the In-Band Management Chassis

2.3 Install slide-in modules

2.4 Install the In-Band Management Chassis

2.5 Connect slide-in modules to network

2.6 Connect Redundant Power Supply (Optional)

2.7 Power on the In-Band Management Chassis

2.1 Requirement

The In-Band Management Chassis basic requirements for installation are as

follows.

• Environmental conditions.

One power outlet for the In-Band Management Chassis internal

power supply

One power outlet for a Redundant Power Supply (if ordered)

Proper ventilation

UTP cables should not run in the same duct as the power and

phone line cables

• Required fiber conversion slide-in modules

• Required Fiber and UTP cables

• Redundant Power Supply (optional)

• Rack mounting tools

2.2 Unpacking the In-Band Management Chassis

The following items should be checked after opening the shipping package.

1. In-Band Management Chassis

2. Power Cord

3. User's Guide (CD-ROM)

4. Slide-In Converter Modules (optional)

5. Redundant Power Supply (optional)