Avlite AV-SIGN-20 Kurulum ve Servis Kılavuzu - Sayfa 8

İnvertör Avlite AV-SIGN-20 için çevrimiçi göz atın veya pdf Kurulum ve Servis Kılavuzu indirin. Avlite AV-SIGN-20 16 sayfaları. Solar sign light

Installing the Light Assembly to a Post (AV-SIGN-20-PM)

The completed AV-SIGN-20-PM assembly can be mounted onto a post. Two people may be required

to install this AV-SIGN-20-PM to a post, depending on the height it is mounted.

a. The AV-SIGN-20-PM is designed to be fitted to a 90mm OD pipe, but can be fitted to any post from

3"OD to 4"OD.

b. Position the AV-SIGN-20-PM against the post and fit 2 x U-Clamps to the upper and lower sections

of the bracket. Position the AV-SIGN-20-PM so the solar panel is not shaded when assembly is

completed.

c. Secure to the post by tightening the U-Clamps.

d. Position and mount the lights as required.

Charging the Battery

New lights should be left in the sun for 1-2 days to ensure the battery is charged before placing

in service.

Preferred Installation Location

For best light performance, ensure solar modules are not covered and are in clear view of the

sky with no shadows.

Latest products and information available at www.avlite.com

674

(26.5")

237

(9.3")

Activation

AV-SIGN-20

Solar Sign Light

432 typical

(17.0")