Avlite AV-RMU Hızlı Başlangıç Kılavuzu

Ölçüm Cihazları Avlite AV-RMU için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Avlite AV-RMU 2 sayfaları.

Quick Start Guide

AV-RMU

Your system will consist of: 1 x AV-RMU remote monitoring unit. To

successfully set up this product, you require:

•

Star2M

portal access

•

Internet connection

Introduction

The purpose of this quick start guide is to present a brief summary of the steps involved in the installation of

the Remote Monitoring Unit (RMU), from the physical installation of the enclosure itself to configuration in

Star2M.

Step 1: Installing the RMU

Remove the AV-RMU remote monitoring unit

from the packaging and carefully place on a solid

work surface.

Step 3: Complete wiring for applicable

external connection interfaces

Connect cables through the applicable cable glands in

the RMU enclosure.

Note: Ensure that the unused cable glands are sealed

using the provided bungs.

Note: Connection for serial comms monitoring can be

done either via Serial Cable (standard installation) or via

direct wiring.

Please see installation manual for further details.

For the full manual, visit the link below:

avlite.com/product/remote-monitoring-unit-av-rmu

Thank you for purchasing this product. This guide will

provide you with a brief summary of the steps involved in

successfully installing the Remote Monitoring Unit (RMU).

Step 2: Open the RMU enclosure

Loosen and remove the 8 X M3 screws at the back

of the enclosure and remove the top cover.