Avlite AV-RMU Посібник із швидкого старту
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Вимірювальні прилади Avlite AV-RMU. Avlite AV-RMU 2 сторінки.
Друкувати сторінку
Quick Start Guide
AV-RMU
Your system will consist of: 1 x AV-RMU remote monitoring unit. To
successfully set up this product, you require:
•
Star2M
®
portal access
•
Internet connection
Introduction
The purpose of this quick start guide is to present a brief summary of the steps involved in the installation of
the Remote Monitoring Unit (RMU), from the physical installation of the enclosure itself to configuration in
Star2M.
Step 1: Installing the RMU
Remove the AV-RMU remote monitoring unit
from the packaging and carefully place on a solid
work surface.
Step 3: Complete wiring for applicable
external connection interfaces
Connect cables through the applicable cable glands in
the RMU enclosure.
Note: Ensure that the unused cable glands are sealed
using the provided bungs.
Note: Connection for serial comms monitoring can be
done either via Serial Cable (standard installation) or via
direct wiring.
Please see installation manual for further details.
For the full manual, visit the link below:
avlite.com/product/remote-monitoring-unit-av-rmu
Thank you for purchasing this product. This guide will
provide you with a brief summary of the steps involved in
successfully installing the Remote Monitoring Unit (RMU).
Step 2: Open the RMU enclosure
Loosen and remove the 8 X M3 screws at the back
of the enclosure and remove the top cover.