Aqua Creek Products Power EZ 2 Manuel - Sayfa 7

Kaldırma Sistemleri Aqua Creek Products Power EZ 2 için çevrimiçi göz atın veya pdf Manuel indirin. Aqua Creek Products Power EZ 2 16 sayfaları. Pool lift and hard seat option
Ayrıca Aqua Creek Products Power EZ 2 için: Manuel (11 sayfalar), Manuel (11 sayfalar), Manuel (12 sayfalar)

Sayfayı Yazdır

STEP 5. Locate the chain assembly and insert the quick links

into the holes in the sling support bars (A).

Attach the hanger to the boom eye on the lift (B).

Adjust the chain links so that the sling is at the

appropriate height to allow the user easy access (C).

This may require several adjustments. Also, be

mindful of any obstacles such as coping or a gutter

that will need to be cleared.

STEP 6. Attach the handset controller plug at the base of

the control box. Press fi rmly until plug is fully seated in the

control box.

STEP 7. Slide the EZ turn bar into the attachment bracket.

If desired, the turn bar can be locked in place using the

1/4" button head, lock and fl at washer. Mount the FULLY

CHARGED 24V battery on top of the control box. When

properly mounted the battery will lock in place, causing a

'click' sound, and will sit fl ush and square with the control box.

ATTENTION! THE BATTERY MUST BE CHARGED FOR 24

HOURS BEFORE FIRST USE. STORE THE BATTERY ON THE

CHARGER AND NEVER LEAVE THE BATTERY ON THE LIFT

WHEN NOT IN USE.

Assembly is complete. Prior to lifting any persons, it is

recommended that the lift be operated 3-5 times without a

load for the lifts "break in" cycle period as well as to check for

proper functioning (and that the instructions for operating

the lift be read and incorporated into a training program for

the persons who will be operating the lift). For any person

operating the lift, please continue to operating instructions.

Read carefully for comprehension.

Assembly Instructions

STEP 5

STEP 6

STEP 7

24V BATTERY

(CHARGED)

EZ TURN

BAR

Revised 5/28/21