Aqua Logic DS-4-WCMD Kurulum ve Bakım Kılavuzu - Sayfa 4

Soğutucu Aqua Logic DS-4-WCMD için çevrimiçi göz atın veya pdf Kurulum ve Bakım Kılavuzu indirin. Aqua Logic DS-4-WCMD 9 sayfaları. Delta star water-cooled marine duty in-line water chillers

Sayfayı Yazdır

1. Electrical Hookup

WARNING: DO NOT over tighten water fittings.

•

Mount chiller on a flat pad and away for water spray.

•

Give at least 1 ft all the way around unit for servicing.

•

Install evaporator water inlet and outlet.

•

Install condenser water inlet and outlet.

•

Test water fittings for leaks.

•

Apply electrical power to the chiller.

•

Adjust the controller to the desired water temperature. (See "Operation and Programming")

•

Important:

Regulate condenser water until pressure on the pressure gauge reads between 115 to 125 PSIG for models

DS-4-WCMD thru DS-9-WCMD and 195 to 220 PSIG for model DS-10-WCMD. Check after 15 minutes of run time,

adjust the water flow (if needed) to the correct pressure.

Warning: This unit must have proper water flow rate both on the evaporator and

the condenser to operate correctly.

CHILLER SET-UP AJUSTMENTS