DeZurik PMV P36C Manuel - Sayfa 13

Valf Konumlandırıcılar DeZurik PMV P36C için çevrimiçi göz atın veya pdf Manuel indirin. DeZurik PMV P36C 19 sayfaları. For pneumatic actuators

Sayfayı Yazdır
DeZURIK
PMV P36C and P41C Positioners
used with DeZURIK Pneumatic Actuators
Installing I/P Unit On Positioner
(Continued)
6. Install the I/P unit on the top of the positioner, making sure the four O-rings are in the correct
places. See Figure 10b.
7.
Tighten the I/P unit with the three screws. See Figure 10a.
Figure 10 – I/P Unit On Positioner
8. Connect input signal cable to port lE and tighten the cable gland (see Figure 10e).
9. Adjust the O-ring on the I/P unit housing to desired position; sealed or drained (see Figure 10c).
10. Install a plug or a gauge in port P, and make sure the filter plug is tightened (see Figure 10d).
August 2012
Page 13
D10327