DeZurik PMV P36C Посібник - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник для Позиціонери клапанів DeZurik PMV P36C. DeZurik PMV P36C 19 сторінок. For pneumatic actuators

DeZURIK

PMV P36C and P41C Positioners

used with DeZURIK Pneumatic Actuators

Installing I/P Unit On Positioner

(Continued)

6. Install the I/P unit on the top of the positioner, making sure the four O-rings are in the correct

places. See Figure 10b.

Tighten the I/P unit with the three screws. See Figure 10a.

Figure 10 – I/P Unit On Positioner

8. Connect input signal cable to port lE and tighten the cable gland (see Figure 10e).

9. Adjust the O-ring on the I/P unit housing to desired position; sealed or drained (see Figure 10c).

10. Install a plug or a gauge in port P, and make sure the filter plug is tightened (see Figure 10d).

August 2012

Page 13

D10327