Avonic AV-CON300 Kullanıcı Kılavuzu - Sayfa 11
Kontrolör Avonic AV-CON300 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avonic AV-CON300 16 sayfaları. Ptz camera controller
Ayrıca Avonic AV-CON300 için: Kullanıcı Kılavuzu (13 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)
Sayfayı YazdırAddressing Multiple Cameras
Both the controller and the camera need to communicate over the same protocol and address.
Tally/Upgrade connection
Tally not implemented in AV-CON300 model.
If any Firmware Update is advised, please contact Avonic for firmware image and update procedure.
DIP switches
Standard operating setting is all DIP switches OFF, except DIP7 is ON.
Operation Instructions
Display
The camera controller has a display on which controls are visible. The first line shows the active
channel and active camera and the communication protocol.
The second line shows what action is done on the controller or asks for next action to perform.
Menu
Keyboard settings menu:
1) Press the MENU key
2) Enter password: 8888 (default the password option is OFF, so no password needed)
3) press "MENU" key to Exit menu
In the menu, move the joystick up/down to scroll through the menu options. Move the joystick to
the right to choose the highlighted menu option. Move the joystick up/down to change values. Move
the joystick to the left to get one level up in the menu.
If any value has changed, use the MENU key to enter the value. Two options can be selected by
moving the joystick up/down and to the right.
•
Exit Saving
•
Exit without Saving
www.avonic.eu
11