Aqua Science Fleck 2510 SXT Digital Kurulum Kılavuzu - Sayfa 8

Su Filtrasyon Sistemleri Aqua Science Fleck 2510 SXT Digital için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Aqua Science Fleck 2510 SXT Digital 12 sayfaları. Digital water softener system

Sayfayı Yazdır

Fleck 5600 SXT Digital Water Softener System Installation Manual

Brine Tank Assembly (continued)

1.) Screw the valve connection assembly to the

control valve.

3.) Thread the Barb into the drain port of the control valve.

Note: Typically comes assembled by Aqua Science

800-767-8731

4.) Insert the backwash line onto the barb.

It will be a snug fit. You will have to use a little

force to get it all the way on.

2.) Snug using an adjustable wrench.

NOTE: If you have to install the disk button, you will need

to remove the valve button in order to place the disk button.

This will screw out. Be sure not to pry it out. I could cause

damage to the unit.

Place the disk button in first with the rounded inside edges

facing down and then replace the valve button behind the

disk button.

Backflow Reducer Button

(Install direction)

Button

Retainer

Disk Button