Allied Telesis Rapier i series Nasıl Yapılandırılır - Sayfa 2
Anahtar Allied Telesis Rapier i series için çevrimiçi göz atın veya pdf Nasıl Yapılandırılır indirin. Allied Telesis Rapier i series 9 sayfaları. Virtual router redundancy protocol
Ayrıca Allied Telesis Rapier i series için: Sorun Giderme Kılavuzu (8 sayfalar), Sorun Giderme (5 sayfalar)
Sayfayı Yazdır
Related How To Notes
For a detailed discussion of redundancy options on the server side, see How to Configure
Microsoft Windows 2003 Network Load Balancing Clustering with Allied Telesis Switches.
The following other How To Notes also use VRRP:
How To Configure An L3 Switch To Use Different MAC Addresses On Different VLANs
How To Configure Load Balancer Redundancy on Allied Telesis Routers and Switches
How To Notes are available from www.alliedtelesis.com/resources/literature/howto.aspx.
Example network
The two core switches are Layer 3 routing and define the IP address ranges for the VLANs
configured on the switches. The core switches are also running VRRP to provide router
redundancy for end devices such as the PCs and servers. The end devices are connected to
the core switches through Layer 2 distribution switches.
The core switches are configured with unique static IP addresses for each VLAN but share a
common virtual IP address for each VLAN. VRRP associates a virtual MAC address with
Page 2 | AlliedWare™ OS How To Note: VRRP
ports 3-24
distribution switch 1
2
port 1
port 1
2
3
23, 24
core switch 1:
VRRP master
3-24
distribution switch 2
1
2
server farm
Related How To Notes
3-24
distribution switch 3
1
2
port 1
2
3
23, 24
core switch 2:
VRRP backup
example.eps
...
...