DG USB3D-IP Manuel - Sayfa 12
Anakart DG USB3D-IP için çevrimiçi göz atın veya pdf Manuel indirin. DG USB3D-IP 16 sayfaları. Usb3.0 device function ip-core
Sayfayı Yazdır
dg_usb3.0_dev_ip_demo_instruction_en.doc
After FPGA operation starts, at least following Figure 18 message will appear on the serial console.
•
(same meaning of DS4). If Figure 18 message does not appear, check serial (USB mini) cable as well as
serial communication parameters.
When communication with HostPC is successfully started, following Figure 19 message will appear
•
on the serial console (same meaning of DS6).
15 May 2015
Figure 18
Figure
18: Device operation start message
: Device operation start message
Figure
Figure
18
18
: Device operation start message
: Device operation start message
Figure 19
Figure
Figure
Figure
19: Mass Storage Class operation start message
19
19
: Mass Storage Class operation start message
: Mass Storage Class operation start message
: Mass Storage Class operation start message
Page 12