2Wire Gateway 100 Series Kurulum Kılavuzu - Sayfa 10

Ağ Geçidi 2Wire Gateway 100 Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. 2Wire Gateway 100 Series 19 sayfaları. Usb driver installation for macintosh computers
Ayrıca 2Wire Gateway 100 Series için: Sürücü Kurulumu (1 sayfalar)

Sayfayı Yazdır

Gateway Installation and Support Guide

Appendix A: Connecting Your Computer Using USB

Connecting your computer to the gateway using USB requires an available USB port. Only one Windows or

Macintosh computer can be directly connected to the 2Wire gateway using the USB connection.

Installing the Gateway and USB Driver on a Windows PC

With your computer powered off and the 2Wire Setup Wizard CD still in the CD-ROM drive, connect the

provided blue USB cable from the USB port on the 2Wire gateway to your computer's USB port. A USB port

is identified by the following icon:

To complete your USB connection to the gateway, you must install the 2Wire gateway USB driver on your

computer.

Power on your computer. If the Add Hardware Wizard displays, follow the on-screen instructions

selecting recommended default settings. If prompted to identify where to search for drivers, uncheck

and check

Floppy Disk drive

After the driver installs, click

resume after your PC has rebooted.

NOTE TO WINDOWS 98 USERS: Microsoft Windows 98 users may be prompted to insert the Windows

98 installation CD-ROM after installing the 2Wire gateway USB drivers. Once the Windows 98 updates

are complete, remove the Windows 98 CD and reinsert the 2Wire Setup Wizard CD into your CD-ROM

prior to rebooting your PC.

CD-ROM drive

to complete the driver installation. Your 2Wire Setup Wizard CD will

Finish