2Wire Gateway 100 Series Kurulum Kılavuzu - Sayfa 12
Ağ Geçidi 2Wire Gateway 100 Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. 2Wire Gateway 100 Series 19 sayfaları. Usb driver installation for macintosh computers
Ayrıca 2Wire Gateway 100 Series için: Sürücü Kurulumu (1 sayfalar)
Sayfayı YazdırGateway Installation and Support Guide
Appendix B: Indicator and Status Lights
The gateway has three indicator lights that can be used to diagnose installation and connection problems.
The following tables describe how to interpret the POWER, BROADBAND LINK, and LOCAL NETWORK lights.
Broadband Link light
OFF
Blinking orange
Solid red
Solid orange
Blinking green
Solid green
Local Network light
OFF
ON
1.The 2Wire 170 gateway does not include HomePNA.
10
Power light
Operating state
OFF
The gateway is not getting power.
Blinking green
The gateway is booting up.
Solid green
Power is on.
Solid red
System error. Contact Technical Support.
Operating state
No broadband signal is present. The gateway is not plugged into
a power outlet, or the gateway is not physically connected to
your broadband service.
The gateway is attempting to establish a physical broadband
connection.
The gateway has not detected a broadband signal.
The gateway has established a physical broadband connection
but was not able to successfully connect to your Internet
Service Provider, or has not yet been configured.
The gateway is attempting to establish a connection to your
broadband service(s).
The gateway is fully connected to your broadband service(s).
Operating state
The gateway is not plugged into a power outlet, computer, or hub
1
by way of HomePNA
, USB, Ethernet, or Wireless.
The gateway is connected to a computer or hub by way of
HomePNA, USB, Ethernet, or Wireless.