Avtech DG206X Kullanıcı Kılavuzu - Sayfa 7

IP Kamera Avtech DG206X için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Avtech DG206X 7 sayfaları. Ir bullet camera

FUNC. SET

MOTION

DETECTON*

PRIVACY

SYSTEM SETUP

RESET

FACTORY MODE

SAVE & EXIT

* The function here is for this camera only, and the detection log will be not noted in the DVR.

FAQ

The image quality at night is not good. I can see some red dots at the edge of the image. What should I do?

Please go to the camera's parameter setting page as described in the section of "CAMERA PARAMETERS", and select

EXPOSURE -> AGC to change the value to MIDDLE, and check again.

DESCRIPTION

Select ON to enable motion detection or OFF to disable this

SCREEN

ALARM

function.

No function.

PAD OUTPUT

Select the area for motion detection.

SECTION

Select the sensitivity for motion detection from LOW, MIDDLE and

SENSITIVITY

HIGH.

You'll see a default masking area on the screen.

Select ON / OFF to enable / disable this function.

MASKING

COLOR

Select a color to show area masking.

HEIGHT /

Set the area to mask.

WIDTH /

LEFT /

RIGHT /

TOP /

BOTTOM

OSD COLOR

Select the color for this OSD display.

OSD BG

Select the background color for this OSD display.

Enable to restore the camera parameters to factory default values.

The camera image will flash once when the reset is done.

Select YES to save and exit, or select NO to exit without saving.