Dell E74S001 Referans Kılavuzu - Sayfa 14

Sunucu Dell E74S001 için çevrimiçi göz atın veya pdf Referans Kılavuzu indirin. Dell E74S001 25 sayfaları.

Sayfayı Yazdır

Table 15. ISCSI Device1 Settings screen details (continued)

Option

Connection 2

Connection 1 Settings

Connection 2 Settings

Connection Order

Integrated Devices

To view the Integrated Devices screen, power on the system, press F2, and click System Setup Main Menu > System BIOS

> Integrated Devices.

Table 16. Integrated Devices details

Option

User Accessible USB Ports

iDRAC Direct USB Port

Internal SD Card Port

Internal SD Card Redundancy

Internal SD Primary Card

Embedded NIC1 and NIC2

I/OAT DMA Engine

Pre-operating system management applications

Description

Enables or disables the iSCSI connection. This option is set to Disable by default.

Enables you to control the configuration for the iSCSI connection.

Enables you to control the order for which the iSCSI connections will be

attempted.

Description

Configures the user accessible USB ports. Selecting Only Back Ports On

disables the front USB ports; selecting All Ports Off disables all front and

back USB ports; selecting All Ports Off (Dynamic) disables all front and back

USB ports during POST. This option is set to All Ports On by default.

When user accessible USB ports are set to All Ports Off (Dynamic) the

Enable Front Ports Only option is enabled.

● Enable Front Ports Only: Enables or disables the front USB ports during

the operating system runtime.

The USB keyboard and mouse still function in certain USB ports during the

boot process, depending on the selection. After the boot process is complete,

the USB ports will be enabled or disabled as per the setting.

The iDRAC Direct USB port is managed by iDRAC exclusively with no host

visibility. This option is set to ON or OFF. When set to OFF, iDRAC does not

detect any USB devices installed in this managed port. This option is set to On

by default.

Enables or disables the internal SD card port of the Internal Dual SD Module

(IDSDM). This option is set to On by default.

Configures the redundancy mode of the Internal Dual SD Module (IDSDM).

When set to Mirror Mode, data is written on both SD cards. After failure of

either card and replacement of the failed card, the data of the active card is

copied to the offline card during the system boot.

When Internal SD Card Redundancy is set to Disabled, only the primary SD

card is visible to the operating system. This option is set to Disabled by

default.

By default, the primary SD card is selected to be SD Card 1. If SD Card 1 is not

present, then the controller selects SD Card 2 to be the primary SD card.

Enables or disables the Embedded NIC1 and NIC2. If set to Disabled (OS),

the NIC may still be available for shared network access by the embedded

management controller. Configure the Embedded NIC1 and NIC2 option

by using the NIC management utilities of the system. This option is set to

Enabled by default.

Enables or disables the I/O Acceleration Technology (I/OAT) option. I/OAT is

a set of DMA features designed to accelerate network traffic and lower CPU

utilization. Enable only if the hardware and software support the feature. This

option is set to Disabled by default.