DH Lifelabs Sciaire Storm HD110 Kullanım Kılavuzu - Sayfa 11
Hava Temizleyici DH Lifelabs Sciaire Storm HD110 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. DH Lifelabs Sciaire Storm HD110 14 sayfaları.
Sayfayı YazdırUsing the Air Purifier
1
Shake off excess water at the sink.
3
4
Move hands back and forth slightly to dry the
water on the hands.
After powering on, the device needs to be triggered once to enter normal operating mode.
The maximum working time of hand drying is 30 seconds. If the device works for more than 30 seconds, it
will stop for protection.
17
2
The device has two sensors to each side of the air
output. Place hands separated and paralell to the
device to trigger sensors.
4
When the hands are dry, pull your hands out
completely.
Indicator Light Key
Indicator Light
Copyright © 2023 Dernier & Hamlyn Inc. All rights reserved.
Standby Mode
Flashing blue light
Disinfection Mode
Solid blue light
Hand Drying Mode
Solid green light
Activated Carbon (AC) Filter Replacement
Reminder Alternating flashing red and blue light
HEPA Filter Replacement Reminder
Alternating flashing red and green light
AC or HEPA Filter Not Installed
Alternating flashing red and yellow light
Device Motor Failure
Flashing white light
Disinfection Fan Failure
Alternating flashing white and red light
NTC Temperature Sensor Fault Alarm
Flashing yellow light
High Voltage Input Detection Alarm
Flashing red light
18