Dell OptiPlex FX130 Manuel - Sayfa 13

Sunucu Dell OptiPlex FX130 için çevrimiçi göz atın veya pdf Manuel indirin. Dell OptiPlex FX130 18 sayfaları. Re-imaging guide
Ayrıca Dell OptiPlex FX130 için: Montaj Kılavuzu (8 sayfalar), Teknik El Kitabı (8 sayfalar)

Sayfayı Yazdır

Use the arrow keys to select an option that corresponds to the server

you wish to clone the disk image to. There are three choices available.

To clone the disk image to an NFS mounted server, select <6>

and press <Enter>.

To clone the disk image to Windows Share Network, select <7>

and press <Enter>.

To clone the disk image to an FTP server, select <8> and press

<Enter>.

If you are asked for credentials, you will need to enter a valid

username, password and, in the case of a Windows Share, a

domain name.

Once a connection has been established, the image cloning will

begin. A progress bar will display the current status of the cloning

process. Do not turn off your thin client during this time.

When the cloning is complete, the Re-Imaging Utility will return

itself to the Main Menu.

Using the Re-Imaging Utility to Update

BIOS on the Thin Client

Writing the BIOS to the Thin Client

When writing the BIOS onto the thin client, the BIOS itself must be on

the same hard disk or flash drive that contains the Re-Imaging Utility.

NOTE: BIOS images are available on support.dell.com.

Follow the previous steps to open the boot menu and access the

Re-Imaging Utility. When the boot menu appears, select the named

hard disk or flash drive containing the Re-Imaging Utility and press

<Enter>.

Once the boot up is complete the Devon IT Re-Imaging Utility Dell

Edition Main Menu is displayed.

Use the arrow keys to select <15> Write BIOS Image and press

<Enter>.

Dell OptiPlex FX130 and FX170 Re-Imaging Guide