Dell PowerEdge 2420 Manuel - Sayfa 6

Sunucu Dell PowerEdge 2420 için çevrimiçi göz atın veya pdf Manuel indirin. Dell PowerEdge 2420 12 sayfaları. Rack enclosures
Ayrıca Dell PowerEdge 2420 için: Manuel (20 sayfalar), Manuel (20 sayfalar), Manuel (17 sayfalar), Manuel (12 sayfalar), Manuel (10 sayfalar), Manuel (10 sayfalar), Manuel (9 sayfalar), Manuel (9 sayfalar), Manuel (10 sayfalar), Manuel (11 sayfalar), Manuel (8 sayfalar), Teknik Kılavuz (37 sayfalar)

Sayfayı Yazdır

Cable Routing Procedures for Dell™ PowerEdge™ R415 Systems

NOTE: For guidelines on how to route cables within the rack, refer to the Dell

Rack Enclosures

white paper

1.5 Left-Side Mounting Instructions

Install the CMA on the rear left side of the rails by attaching both CMA housings to the attachment

brackets on the rails.

2. Route the cables through the CMA while avoiding twisting the cables. Use the hook and loop

straps on the CMA to secure the cables. See Figure 4.

Figure 4: Routing the Cables Through the CMA

3. If the cable bundle includes a keyboard, video, and mouse (KVM) dongle, place the dongle inside

the CMA basket for light to medium cable loads. If the KVM dongle does not fit inside the basket

with the other cables, attach the dongle to the exterior of the front basket as shown in Figure 5.

Best Practices Guide for

NOTE: Do not store excess cable

slack inside the CMA. The cable may

protrude through the CMA, thus

causing binding and potentially

damaging the cable.

Cables entering the CMA should have

a small amount of slack to avoid cable

strain when the CMA is extended.

Page 4