Dell PowerEdge 2420 Teknik Kılavuz - Sayfa 20

Sunucu Dell PowerEdge 2420 için çevrimiçi göz atın veya pdf Teknik Kılavuz indirin. Dell PowerEdge 2420 37 sayfaları. Rack enclosures
Ayrıca Dell PowerEdge 2420 için: Manuel (20 sayfalar), Manuel (20 sayfalar), Manuel (17 sayfalar), Manuel (12 sayfalar), Manuel (10 sayfalar), Manuel (10 sayfalar), Manuel (9 sayfalar), Manuel (9 sayfalar), Manuel (10 sayfalar), Manuel (12 sayfalar), Manuel (11 sayfalar), Manuel (8 sayfalar)

Sayfayı Yazdır

racks. Sliding rails require an adapter bracket for installation in threaded- hole racks. Other products

including rack- mount UPS systems, KVMs, and the 1U equipment shelf also use the ReadyRails

interface.

With the 12

generation servers, the rack/rail interface for the sliding rails has been updated to the

ReadyRails™ II design, which provides native support (with simple conversion) for threaded- hole

racks. ReadyRails and ReadyRails II rail kits are extremely fast and easy to deploy and are as easy to

remove from the rack as they are to install.

The rail kits are available in either sliding or static style, based on the system specifications and the

customer's needs. Sliding rails allow the system to be fully extended out of the rack for service and

have an optional cable management arm (CMA) that provides a guide for component cable routing

to the rear of the rack. Static rails support a wider variety of racks than the sliding rails but do not

support serviceability in the rack. Due to their reduced complexity and lack of need for CMA

support, the static rails offer a smaller footprint than the sliding rails.

Sliding

Static

Figure 15. ReadyRails II and ReadyRails mounting kits

PowerEdge Rack Enclosures Technical Guide