Dell PowerEdge R610 Bakım ve Sorun Giderme - Sayfa 15

Sunucu Dell PowerEdge R610 için çevrimiçi göz atın veya pdf Bakım ve Sorun Giderme indirin. Dell PowerEdge R610 24 sayfaları. Poweredge series
Ayrıca Dell PowerEdge R610 için: Dokümantasyon Güncellemesi (14 sayfalar), Güncelleme Kılavuzu (32 sayfalar), Bilgi Güncellemesi (14 sayfalar), Bilgi Güncellemesi (38 sayfalar), Güncelleme Kılavuzu (44 sayfalar), Kurulum Talimatları (2 sayfalar), Manuel (10 sayfalar), Donanım Kurulum Talimatları (2 sayfalar), Güncelleme Kılavuzu (14 sayfalar), Portföy Kılavuzu (27 sayfalar), Veri Sayfası (2 sayfalar)

Sayfayı Yazdır
Dell PowerEdge R610 Bakım ve Sorun Giderme
No.
Task
2
Observe safety warnings
3
Power down server
4
Slide the server out of the
rack
5
Remove the cover
6
Replace the component:
• R610 SRVR DUAL
PORT 1GB NIC
• R610 SRVR DVD-RW
DRIVE W/ BRKT
• R610 SRVR FAN FRU
• R610 SRVR 2GB
MEMORY DIMM
• R610 SRVR 4GB
MEMORY DIMM
• R610 SRVR RAID
BATTERY
November 2010
Reference
HOM: Safety First—For You
and Your System
RI-SR
HOM: Opening and Closing
the System
HOM: Expansion Cards
HOM: Optical Drive
HOM: Cooling Fans
HOM: System Memory
HOM: RAID Battery
Maintaining and Troubleshooting the Dell
Comments on this document? [email protected]
Replacing internal components
Avaya
recommendation
Electrostatic alert:
Ensure that you are
properly grounded
before handling
internal
components.
Mark any external
cables connected to the
NIC and reconnect to
the same ports after the
NIC is replaced.
In the Removing an
Optical Drive section
perform steps 2–5 only.
In the Installing an
Optical Drive section
perform steps 2–6, 8,
and 10 only.
Caution:
Do not attempt to
hot-swap a fan.
Consult server cover
label for memory
placement.
Consult application/
solution documentation
for specific procedures.
Remove the battery
from the cable.
Do not replace the
battery cable unless it is
defective.
Table continues...
™
™
PowerEdge
R610 Server
15