Dell UltraSharp U2711 Kullanıcı Kılavuzu - Sayfa 43
Monitör Dell UltraSharp U2711 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dell UltraSharp U2711 44 sayfaları. U2711
Ayrıca Dell UltraSharp U2711 için: Kurulum Kılavuzu (2 sayfalar), Teknik Özellikler (1 sayfalar), Kurulum Kılavuzu (2 sayfalar)
Sayfayı Yazdır
NOTICE:
Do not remove the device while reading or writing media. Doing so may cause loss of data or malfunction in the media.
Problem
Drive letter is not assigned.
(Windows® XP only)
Drive letter is assigned, but the
media is not accessible
The media has been ejected
during writing or erasing.
Despite the disappearance of the
pop-up window, the media has
been ejected while the LED was
blinking.
Cannot format or write on the
media.
Back to Contents Page
Cause
Conflict with network drive letter.
The media needs reformatting.
Displays the error message, "Error copying
file or folder."
Displays the error message, "Cannot write
folder (folder name) or file (file name),"
during writing, or, "Cannot remove folder
(folder name) or file(file name),". While
erasing, you cannot write or erase in the
same folder or file name.
Although the pop-up window disappears
during writing, if you eject your media
while the LED is still blinking, then you
cannot complete your action on the media.
Write protect switch is enabled.
Solution
A. Right-click My Computer on the desktop, and then click Manage. Under Computer
Management, click Desk Management.
B. In the list of drives in the right panel, right-click Removable Device and then click
Drive Letter and Paths.
C. Click Change, and in the drop-down box, specify a drive letter for the Removable Device
choosing one that is not assigned to the mapped network drives.
D. Click OK, and then click OK again
Right-click the drive in Explorer and choose Format from the resulting menu.
Reinsert the media and write or erase again.
Format the media for writing or erasing the same folder or file name.
Format the media for writing or erasing the same folder or file name.
Verify that the write- protect switch of the media is unlocked.