Dell PowerEdge R520 Kurulum Kılavuzu - Sayfa 6

Depolama Dell PowerEdge R520 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Dell PowerEdge R520 8 sayfaları. 2-socket, 2u rack server
Ayrıca Dell PowerEdge R520 için: Manuel (11 sayfalar), Başlangıç Kılavuzu (9 sayfalar), Portföy Kılavuzu (27 sayfalar), Teknik Kılavuz (50 sayfalar)

Sayfayı Yazdır

Installing the Second Processor

CAUTION:

Only trained service technicians are authorized to remove the system

cover and access any of the components inside the system. Before you begin this

procedure, review the safety instructions that came with the system.

1 Ensure that you have followed the steps mentioned in "Before You Begin"

on page 3.

2 Unpack the new processor.

CAUTION:

Positioning the processor incorrectly can permanently damage the

system board or the processor. Be careful not to bend the pins in the socket.

CAUTION:

Do not use force to seat the processor. When the processor is

positioned correctly, it engages easily into the socket.

3 Align the notches in the processor with the socket keys on the ZIF socket

and set the processor lightly in the ZIF socket. See Figure 1-1.

4 Close the processor shield.

5 Using a clean lint-free cloth, remove the thermal grease from the heat sink.

CAUTION:

Applying too much thermal grease can result in excess grease coming

in contact with and contaminating the processor socket.

6 Open the grease applicator included with your processor kit and apply all

of the thermal grease in the applicator to the center of the topside of the

new processor.

7 Place the heat sink on the processor.

8 Tighten the heat-sink retention sockets. See Figure 1-2.

Additonal Processor Installation