Dell PowerVault MD1220 Teknik El Kitabı - Sayfa 23

Depolama Dell PowerVault MD1220 için çevrimiçi göz atın veya pdf Teknik El Kitabı indirin. Dell PowerVault MD1220 23 sayfaları. Dell powervault storage enclosure setting up
Ayrıca Dell PowerVault MD1220 için: Güncelleme Kılavuzu (32 sayfalar), Raf Kurulum Talimatları (2 sayfalar), Kurulum (2 sayfalar)

Sayfayı Yazdır

8 Additional Information

•

Non-Dell drive lock-out – In order to ensure the highest quality products and best customer

experience, the PERC H800 will not allow for non-Dell™ SAS HDDs or SSDs to be initialized or

configured in a Dell™ PowerVault™ MD1200 or MD1220.

•

Backward Compatibility (MD1200) - The PowerVault™ MD1200 does not provide backward

compatible support for connecting to previous generation adapters (PERC 5/E or PERC 6/E) or

daisy-chaining with previous generation enclosures (MD1000, MD1120, MD3000, MD3000i).

MD1200 does support a drive carrier that is common with the Dell™ 11

servers.

The previous generation PowerVault™ MD1000 carrier is not compatible with the

MD1200.

•

Backward Compatibility (MD1220) - The PowerVault™ MD1220 does not provide backward

compatible support for connecting to previous generation adapters (PERC 5/E or PERC 6/E) or

daisy-chaining with previous generation enclosures (MD1000, MD1120, MD3000, MD3000i).

MD1220 supports a drive carrier that is common with the Dell™ 11

servers and the previous generation PowerVault™ MD1120.

•

Enclosure Migration and Drive Format – The PowerVault™ MD1200 and MD1220 will not be

supported behind Dell's 3Gb/s PowerVault™ External RAID enclosures, MD3000 and MD3000i.

•

Audible alarm – The PowerVault™ MD1200 and MD1220 support an audible alarm within the

enclosure (must be enabled via OMSS / PERC H800).

•

EMM blank – An EMM blank must be installed in EMM1 position if a second EMM is not installed.

This is required for proper airflow. In order to remove the EMM blank; you will need to remove

EMM0 to access a release latch (see Figure 14) for blank. This ensures the customer shuts down

the enclosure before making any configuration changes that could but data at risk.

** Available in Q3 2010

Figure 14. Latch

Generation PowerEdge™

The