Dell C9000 series Yapılandırma Kılavuzu - Sayfa 8
Anahtar Dell C9000 series için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. Dell C9000 series 9 sayfaları.
Sayfayı Yazdır2.8
Configure flow control
Dell(conf-if-range-te-0/0-23,te-1/0-23)#flowcontrol rx on tx off
2.9
Configure spanning tree on edge ports
Dell(conf-if-range-te-0/0-23,te-1/0-23)#spanning-tree rstp edge-port
Dell(conf-if-range-te-0/0-23,te-1/0-23)#exit
Dell(conf)# protocol spanning-tree rstp
Dell(conf-rstp)#no disable
Dell(conf-rstp)#exit
Dell(conf)#interface range tengigabitethernet 0/0–23 , tengigabitethernet 1/0–23
Dell(conf-if-range-te-0/0-23,te-1/0-23)#no shutdown
Dell(conf-if-range-te-0/0-23,te-1/0-23)#exit
Dell(conf)#exit
2.10
Save configuration
Dell#copy running-config startup-config
Proceed to copy the file [confirm yes/no]: yes
2.11
Configure additional linecards
Repeat the commands from sections 2.2–2.10 to configure additional linecards.
Note: The preceding procedure places all switch ports in the default VLAN. If you prefer to place ports in
a non-default VLAN, refer to the documentation for your switch.
2.12
Save configuration and reload
Dell#copy running-config startup-config
Proceed to copy the file [confirm yes/no]: yes
Dell#reload
8
SCG2011
Dell Networking C9000 Series Switch Configuration Guide for Dell SC Series SANs