Dell C9000 series 구성 매뉴얼 - 페이지 8

{카테고리_이름} Dell C9000 series에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell C9000 series 9 페이지.

2.8

Configure flow control

Dell(conf-if-range-te-0/0-23,te-1/0-23)#flowcontrol rx on tx off

2.9

Dell(conf-if-range-te-0/0-23,te-1/0-23)#spanning-tree rstp edge-port

Dell(conf-if-range-te-0/0-23,te-1/0-23)#exit

Dell(conf)# protocol spanning-tree rstp

Dell(conf-rstp)#no disable

Dell(conf-rstp)#exit

Dell(conf)#interface range tengigabitethernet 0/0–23 , tengigabitethernet 1/0–23

Dell(conf-if-range-te-0/0-23,te-1/0-23)#no shutdown

Dell(conf-if-range-te-0/0-23,te-1/0-23)#exit

Dell(conf)#exit

2.10

Dell#copy running-config startup-config

Proceed to copy the file [confirm yes/no]: yes

2.11

Repeat the commands from sections 2.2–2.10 to configure additional linecards.

Note: The preceding procedure places all switch ports in the default VLAN. If you prefer to place ports in

a non-default VLAN, refer to the documentation for your switch.

2.12

Dell#copy running-config startup-config

Proceed to copy the file [confirm yes/no]: yes

Dell#reload

SCG2011

Dell Networking C9000 Series Switch Configuration Guide for Dell SC Series SANs