Dell Force10 S4810P Hızlı Başlangıç Kılavuzu - Sayfa 8

Anahtar Dell Force10 S4810P için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Dell Force10 S4810P 27 sayfaları. Quick start guide

Step

Task

Attach the brackets to the sides of the chassis at the PSU end, using four

screws for each bracket.

Attach the bracket so that the "ear" faces to the PSU and the outside of

the chassis.

View of chassis PSU side

Install chassis into 2-post rack or cabinet

Step

Task

Dell Force10 recommends that one person hold the S4810 chassis in

place while a second person attaches the brackets to the posts.

Attach the bracket "ears" to the rack or cabinet posts, using two screws

for each bracket. Ensure the screws are tightened firmly.

Attach a Ground Cable

The S4810 is shipped with 1 M4x0.7 screw for attaching a ground cable to the

chassis. The cable itself is not included. Dell Force10 recommends a 6AWG

one-hole lug, #10 hole size, 63" spacing (not included in shipping) to properly

ground the chassis. The one-hole lug must be a UL recognized, crimp-type lug.

NOTE: The rack installation ears are not suitable for grounding.

CAUTION: Grounding conductors must be made of copper. Do not use

aluminum conductors.

Installing the Hardware

Power Supply

Connect to

Rack/Cabinet

View from chassis I/O side

(ears)

Screws

Connect to

PSU0

PSU1

Rack Mounting

Ears

Rack/Cabinet

Post