Dell PowerConnect 6224 Yayın Notu - Sayfa 22

Anahtar Dell PowerConnect 6224 için çevrimiçi göz atın veya pdf Yayın Notu indirin. Dell PowerConnect 6224 34 sayfaları. Powerconnect 6200 series
Ayrıca Dell PowerConnect 6224 için: Teknik Özellikler (2 sayfalar), Planlama ve Hazırlık Kılavuzu (12 sayfalar)

Sayfayı Yazdır

Description

Changing Radius Timeout from

Web interface inadvertently

changes Priority to same value.

Radius Servers always show

active status.

Interface Configuration web page

would not allow the user to set the

MTU size to zero.

PCs or clients do not authenticate

after reboot and logging back on

(802.1x).

Web Display of Rapid Spanning

Tree only displays first 10 interface

ports

Web Global Portfast applies

Portfast on trunk switchports

IGMP Snooping failing on PC6200

stack of two switches

User Impact

Changing the Timeout Duration field on the

RADIUS Server Configuration web page would

also change the Priority field to the same value.

The RADIUS Server Status web page was

always displaying the server's status as active.

Interface Configuration web page restricted the

user to configure the IP MTU from 68-9198.

Windows Vista clients were not getting re-

authenticated after the PC rebooted.

The Rapid Spanning Tree Table web page

would only display the first 10, and potential

incorrect interfaces.

Activating global portfast from the Web

Interface applies portfast to trunk interfaces

(Switching>Spanning_Tree>Global_Settings).

When removing portfast globally via the CLI, it

will not remove it from trunks.

Two copies of DLF/Bcast/Unknown unicast

packet will be sent out of the port 1 to 24 if two

PC6248 switches are stacked using both the

stack ports to form stack trunk.

Resolution

Correct the API to properly set the

RADIUS priority.

Retrieved the server status the same as

the CLI for each row in the web page

display.

Changed the weg page IP MTI field do

allow the following values to be

configured: 0 or 68-9198.

Modified the state machine to move to

connecting state to trigger the sending of

the EAP-REQ packet.

Corrected the web page backend API to

retireve all of the applicable interfaces.

While applying Portfast via the GUI, no

check was present to know what the

switchport access of a particular

interface was hence the portfast was

being applied even on trunk switchports.

Modified the driver layer to ignore this

trunk-id while destroying external trunks.

System Firmware Version 3.2.0.6