Dell PowerConnect M8024-k Yapılandırma Kılavuzu - Sayfa 10
Anahtar Dell PowerConnect M8024-k için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. Dell PowerConnect M8024-k 21 sayfaları. Upgrading from version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.9.3 firmware
Ayrıca Dell PowerConnect M8024-k için: Sürüm Notları (27 sayfalar), Ürün Yazılımını Yükseltme (24 sayfalar)
Sayfayı Yazdır
3
Dell recommended switch configuration for M8024 and
M8024-k
These steps show you how to configure two PowerConnect M8024 or M8024-k series switches with a
LAG. The switches are interconnected using four 10 GbE Small Form-factor Pluggable (SFP+) ports, and
the LAG is configured for Dynamic Link Aggregation Control Protocol (LACP).
3.1
Cabling diagram for M8024 and M8024-k
The cabling diagram shown below represents the Dell recommend method for deploying your servers and
EqualLogic arrays.
Figure 2
10
SCG1008
PowerConnect 8024, 8024F, M8024 and M8024-k Switch Configuration Guide for EqualLogic SANs
Cabling diagram