Dell PowerConnect M8024-k Panduan Konfigurasi - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Beralih Dell PowerConnect M8024-k. Dell PowerConnect M8024-k 21 halaman. Upgrading from version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.9.3 firmware
Juga untuk Dell PowerConnect M8024-k: Catatan Rilis (27 halaman), Meningkatkan Firmware (24 halaman)

Dell PowerConnect M8024-k Panduan Konfigurasi
3
Dell recommended switch configuration for M8024 and
M8024-k
These steps show you how to configure two PowerConnect M8024 or M8024-k series switches with a
LAG. The switches are interconnected using four 10 GbE Small Form-factor Pluggable (SFP+) ports, and
the LAG is configured for Dynamic Link Aggregation Control Protocol (LACP).
3.1

Cabling diagram for M8024 and M8024-k

The cabling diagram shown below represents the Dell recommend method for deploying your servers and
EqualLogic arrays.
Figure 2
10
SCG1008
PowerConnect 8024, 8024F, M8024 and M8024-k Switch Configuration Guide for EqualLogic SANs
Cabling diagram