EarthWay 2170T Tow Montaj ve Kullanım Talimatları Kılavuzu - Sayfa 3
Serpme EarthWay 2170T Tow için çevrimiçi göz atın veya pdf Montaj ve Kullanım Talimatları Kılavuzu indirin. EarthWay 2170T Tow 6 sayfaları. Broadcast spreader
Sayfayı Yazdır
7.
Slide axle bushing over axle and into axle
bearing to both sides as shown.
9.
Install coast wheel to axle using outside pin hole. As shown, insert 1"
cotter pin through axle (not thru the wheel). Bend with pliers to prevent
pin from falling out.
TURN SPREADER UPRIGHT ON TO WHEEL.
8.
Install drive wheel to axle using pin hole nearest to lower handles as shown. Insert 2" cot-
ter pin through wheel and through axle. Bend with pliers to prevent pin from falling out.
10.
sure the double bend end of the Pivot Rod is facing the Shut-off
plate) to the Turn to lock in place.
11.
assembly as shown. Turn to lock in place.
12.
above inserting (2) 1 3/4" bolts thru Pivot Bracket and Lower
Handle, Control Support an other Lower Handle and secure with
1/4-20 lock nuts . Line up hole in cross brace with hole in control
support. Insert 1/4-20 x 2 1/4" bolt through control support and
through hole in cross brace. Apply 1/4-20 locknut. DO NOT
TIGHTEN LOCKNUT YET. TIGHTEN THIS NUT LAST.
Insert pivot rod into shut off plate as shown. (T
Insert other end of pivot rod into pivot and bracket
Install control support between lower handles as shown
: Make
IP
PAGE 3