Miele DDG 102 Kullanım ve Kurulum Kılavuzu - Sayfa 10

Havalandırma Davlumbazı Miele DDG 102 için çevrimiçi göz atın veya pdf Kullanım ve Kurulum Kılavuzu indirin. Miele DDG 102 24 sayfaları. External motor roof installation
Ayrıca Miele DDG 102 için: Çalıştırma ve Kurulum Talimatları (28 sayfalar), Kurulum Talimatları Kılavuzu (28 sayfalar), Kurulum Talimatları Kılavuzu (28 sayfalar)

Installation

^ Make a C 185 mm hole in the wall.

^ Push the telescopic wall pipe into the

hole so that it is sitting flush.

The telescopic wall pipe will make it

easier to feed the control cable and

the flexible ducting through later on.

^ Position the motor unit fixing bracket

on the outside wall with the control

cable connection at the bottom.

^ Mark the positions for three drill holes.

^ Drill three 8 mm C holes and plug

with S8 plugs.

^ Connect the 3 mountings through the

fixing holes in the bracket as illustrated.

^ Position the bracket onto the outside

wall again and feed the control cable

with the six-pole connectors through

the telescopic wall pipe into the

house.

^ If equipotential bonding is required,

pull the earth cable through the gap

provided.

Equipotential bonding is required if

the control cable is to be extended

by more than the extension cable

supplied (see "Electrical connection").