Miele DDG 102 Çalıştırma ve Kurulum Talimatları - Sayfa 18

Havalandırma Davlumbazı Miele DDG 102 için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Miele DDG 102 28 sayfaları. External motor roof installation
Ayrıca Miele DDG 102 için: Kullanım ve Kurulum Kılavuzu (24 sayfalar), Kurulum Talimatları Kılavuzu (28 sayfalar), Kurulum Talimatları Kılavuzu (28 sayfalar)

Installation

^ Push the exhaust ducting from the

cooker hood onto the motor unit stub,

and secure with a hose clip.

The motor is set up for use with

C 150 mm ducting. A reducing collar

can be used on the suction side if

C 125 mm ducting is to be used. This

item is available to order from the Miele

Spare Parts Dept.

^ Ducting C 150 mm is then connected

to the exhaust side.

^ If the exhaust air is to be ducted into

the open air, a telescopic wall vent kit

can be used.

This is available to order as an

optional accessory from your dealer

or the Miele Spare Parts Dept.

If the motor is installed vertically with

the exhaust ducting venting over a

roof, a roof vent kit DDF 125/150 or

similar must be used to prevent

rainwater penetrating the exhaust

opening.

^ Connect the control cable plug

connectors.

^ Use the extension cable supplied to

extend the length of the connection

cable if necessary.

Equipotential bonding is required if

the control cable is to be extended

by more than the length of the

extension cable supplied (see

"Electrical connection").

^ If required connect the earth lead to

connection point b in the housing.