Miele DDG 102 Kurulum Talimatları Kılavuzu - Sayfa 19

Havalandırma Davlumbazı Miele DDG 102 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Miele DDG 102 28 sayfaları. External motor roof installation
Ayrıca Miele DDG 102 için: Kullanım ve Kurulum Kılavuzu (24 sayfalar), Çalıştırma ve Kurulum Talimatları (28 sayfalar), Kurulum Talimatları Kılavuzu (28 sayfalar)

DDF 125/150

* Flashing

The DDF 125/150 roof vent is designed

for installing ducting through an angled

tile, slate or shingle roof. The slope of

the roof must be at least 22° to prevent

the ingress of the elements, such as

rain or snow.

Consult a roof tiler or roof plumber for

advice regarding other types of roofing.

Installation on a flat roof is not

possible.

Installation must only be carried out

by a qualified and competent person.

 Remove the roofing around the

installation area.

 Bend the flashing * upwards.

 Position the roof vent on the roof with

the air outlet directed down the roof.

 Secure the roof vent to the roof

substructure with the fixing plate.

 Replace the roofing. Press down on

the flashing to ensure that it creates a

proper seal.

The flashing should be fitted under

the roofing at the top of the roof vent

and above the roofing at the sides

and the bottom of the roof vent.

The roof vent collar has a diameter of

150 mm as standard.

If a diameter of 125 mm is required a

reducing collar must be used.

 Push the flexible ducting onto the

collar and secure it with a hose clip.

It has an integrated non-return flap.

When feeding the exhaust ducting

through the substructure of the roof,

be careful to ensure that any gaps

are sealed up properly afterwards.

Installation