Miele DDG 102 Kurulum Talimatları Kılavuzu - Sayfa 18

Havalandırma Davlumbazı Miele DDG 102 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Miele DDG 102 28 sayfaları. External motor roof installation
Ayrıca Miele DDG 102 için: Kullanım ve Kurulum Kılavuzu (24 sayfalar), Çalıştırma ve Kurulum Talimatları (28 sayfalar), Kurulum Talimatları Kılavuzu (28 sayfalar)

Installation

The ducting collar on the motor unit has

a diameter of 150 mm as standard.

If a diameter of 125 mm is required a

reducing collar must be used.

This is available to order from Miele.

 Push the flexible ducting onto the

collar and secure it with a hose clip.

 Ducting with a diameter of 150 mm is

then connected to the exhaust side.

If the exhaust air is to be ducted into

the open air, a telescopic wall vent kit

can be used. This is available to order

from Miele.

If the motor is installed vertically with

the exhaust ducting venting over a

roof, a roof vent kit DDF 125/150 or

similar must be used to prevent

rainwater from penetrating the

exhaust opening.

 Connect the control cable plug

connectors.

 Use the extension cable supplied to

lengthen the control cable if

necessary.

 If equipotential bonding is required,

connect the earth lead to the earthed

connection point  in the housing.

Equipotential bonding is required if

the control cable is to be extended

by more than the length of the

extension cable supplied (see

"Electrical connection").