HP 124708-001 1850 Giriş Kılavuzu - Sayfa 13

Masaüstü HP 124708-001 1850 için çevrimiçi göz atın veya pdf Giriş Kılavuzu indirin. HP 124708-001 1850 22 sayfaları. System memory troubleshooting best practices for hp proliant servers
Ayrıca HP 124708-001 1850 için: Sorun Giderme Kılavuzu (18 sayfalar)

Sayfayı Yazdır

The 64-bit Xeon 5100 series two-core processor runs at a maximum frequency of 3.0 GHz with 4 MB

of shared L2 cache and a maximum front-side bus speed of 1333 megahertz (Figure 7 right).

The Xeon 5000 Sequence as well as the 5100 and 5200 series processors use the Intel 5000 series

chipsets. These chipsets contain two main components: the Memory Controller Hub (MCH) and the

I/O controller hub. The new Northbridge MCH supports DDR2 Fully-Buffered DIMMs (dual in-line

memory modules).

Figure 7. Diagram representing the major components of two-core Intel Xeon 3000, 5000, 5100, and 5200

Sequence

processors

Xeon four-core processors

The four-core Intel Xeon 5300 series processor (Clovertown) was the first four-core processor for dual-

socket platforms (Figure 8). The Xeon 5300 series processor has two dual-cores. Each pair of cores

shares a L2 cache; up to 4 MB of L2 cache can be allocated to one core. The processor runs at a

maximum frequency of 3.0 GHz, with 2 MB of L2 cache per core. This configuration delivers a

significant increase in processing capacity utilizing the Intel 5000 series chipsets. ProLiant 300 series

servers use the Intel 5000P and 5000Z chipsets. These chipsets support 1066-MHz and 1333-MHz

Two Independent Buses, DDR2 FB-DIMMs, and PCI Express I/O slots.

The four-core Xeon 5400 series processor (Harpertown) has two dual-cores, and each pair shares a

6-MB L2 cache. The Xeon 5400 series processor runs at a maximum frequency of 3.0 MHz with a

1333 MZ or 1600 MHz FSB.

Figure 8. Intel Xeon 5300 and 5400 series processors contain two dual-core chips.