HP 8710w - HP Mobile Workstation Multiboot Kullanıcı Kılavuzu - Sayfa 10

Masaüstü HP 8710w - HP Mobile Workstation için çevrimiçi göz atın veya pdf Multiboot Kullanıcı Kılavuzu indirin. HP 8710w - HP Mobile Workstation 17 sayfaları. Mobile workstation
Ayrıca HP 8710w - HP Mobile Workstation için: Quickspecs (39 sayfalar), Kullanıcı Kılavuzu (15 sayfalar), Kullanıcı Kılavuzu (20 sayfalar), Yazılım Güncellemesi (12 sayfalar), Kullanıcı Kılavuzu (17 sayfalar), Kullanıcı Kılavuzu (20 sayfalar), Ağ Kılavuzu (16 sayfalar), Güvenlik Kılavuzu (35 sayfalar), Kullanıcı Kılavuzu (34 sayfalar), Kurulum Kılavuzu (6 sayfalar), Quickspecs (46 sayfalar), Quickspecs (32 sayfalar)

HP 8710w - HP Mobile Workstation Multiboot Kullanıcı Kılavuzu
3

Considering boot order changes

Before changing the boot order, note the following considerations:
When the computer restarts after the boot order has been changed, the computer attempts to start
using the new boot order.
If there is more than one type of boot device, the computer attempts to boot using the first of each
type of boot device (except for optical devices). For example, if the computer is connected to an
optional docking device (select models only) that contains a hard drive, this hard drive will be shown
in the boot order as a USB hard drive. If the system attempts to boot from this USB hard drive and
fails, it will not attempt to boot to the hard drive in the hard drive bay. Instead, it will try to boot to
the next type of device in the boot order. However, if there are 2 optical devices, and the first optical
device does not boot (either because it does not contain media or the media is not a boot disc),
the system will try to boot to the second optical device.
Changing the boot order also changes the logical drive designations. For example, if you start up
from a CD-ROM drive with a disc formatted as drive C, that CD-ROM drive becomes drive C and
the hard drive in the hard drive bay becomes drive D.
The computer will boot from a NIC device only if the device has been enabled in the Built-In Device
Options menu of Computer Setup and if booting from the device has been enabled in the Boot
Options menu of Computer Setup. Booting from a NIC does not affect logical drive designations
because no drive letter is associated with the NIC.
Drives in an optional docking device (select models only) are treated like external USB devices in
the boot order.
4
Chapter 3 Considering boot order changes