Miele KM 34 Series Teknik Bilgiler - Sayfa 18
Setüstü Ocak Miele KM 34 Series için çevrimiçi göz atın veya pdf Teknik Bilgiler indirin. Miele KM 34 Series 25 sayfaları.
Sayfayı Yazdır
Technical Information
Disconnect the thermocouple from the bottom casing and from the electronic.
Figure 010-7: Thermocouple Removal, Wok Burners
Note:
Carry out the following after reassembly: Leakage Test, Section 020-4.8,
Burning Properties Test, Section 010-4.7, and Automatic Re-Ignition
Test, Section 010-4.9.
4.6
Ignition Electrode Removal
4.6.1
Normal/Fast Burners
1. Disconnect the cooktop from the power supply.
2. Close the gas tap.
3. Cooktop Surface Removal, Section 010-4.1.
4. Remove the two T20 screws securing the appropriate
electrode/thermocouple mounting plate to the burner base (Figure 010-6,
Item 1).
5. Remove the collars securing the electrode (Figure 010-6, Item 3) to the
topside and underside of the mounting plate. Slide the electrode out of the
plate and disconnect it from the transformer.
Note:
Carry out the following after reassembly: Leakage Test, Section 020-4.8,
Burning Properties Test, Section 010-4.7, and Automatic Re-Ignition
Test, Section 010-4.9.
4.6.2
Wok Burners
1. Disconnect the cooktop from the power supply.
2. Close the gas tap.
3. Cooktop Surface Removal, Section 010-4.1.2.
4. Remove the burner cup (Figure 010-7, Item 1) with a 10-millimeter Allen key.
5. Remove the 2 Phillips screws securing the burner to the bottom casing (Figure
010-7, Item 4).
6. Disconnect the ignition electrode connections from the transformer.
7. Pull the electrode (Figure 010-7, Item 3) up and out of the burner to remove.
KM 34xx Gas Cooktops
18