Miele KM 6002 Çalıştırma ve Kurulum Talimatları - Sayfa 16
Setüstü Ocak Miele KM 6002 için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Miele KM 6002 40 sayfaları.
Ayrıca Miele KM 6002 için: Çalıştırma ve Kurulum Talimatları (44 sayfalar)
Sayfayı Yazdır
How the burners work
Standard burners have one heating
band, and variable burners and casser‐
ole areas have two heating bands. De‐
pending on the model, the heating
bands may be separated by a ring.
Each burner features overheat protec‐
tion (internal temperature limiter), which
prevents the ceramic surface from over‐
heating (see "Overheat protection").
When a power level is set, heating is
activated and the heating band is visi‐
ble through the ceramic surface. The
heat output of the burners depends on
the power level set and is controlled
electronically. This causes the "cycling"
of a burner: the heating is turned on
and off.
16
Standard burner
Overheat protection
Heating band
Variable burner
Technical requirement, not a defect
Overheat protection
Outer heating band
Insulating ring
Inner heating band