ALLO USBRIDGE Aluminum Manuel - Sayfa 4

Medya Oynatıcı ALLO USBRIDGE Aluminum için çevrimiçi göz atın veya pdf Manuel indirin. ALLO USBRIDGE Aluminum 4 sayfaları.

*** Power Feed Instructions ***

There are 3 choices to feed power to your USBridge:

1. Recommended: Feed power to the DC connector on bottom (not to the microUSB)

since it accepts 3A.

2. Advanced: if you decide to open your case, you can remove the J28 jumper of the

USBBoard. You can then power the Sparky AND the USB board independently.

3. Not recommended: microUSB of the Sparky. Only 1.8 Amps can be fed through that connector

and both boards need more at boot up... you will run into problems.

For more information, please visit ALLO.com / Transport / USBridge

Support & Downloads at the bottom of the page