AllPondSolutions WF-20000 Hızlı Başlangıç Kılavuzu - Sayfa 2
Çim ve Bahçe Ekipmanları AllPondSolutions WF-20000 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. AllPondSolutions WF-20000 10 sayfaları. Floating fountain pump
Sayfayı YazdırTo ensure your fountain pump is set up and running correctly, and to prevent any
accidental damage or injury, please read and follow the below instructions
carefully before using your product.
SAFETY
IMPORTANT!
Disconnect the mains electricity supply before attempting any
installation / maintenance of any kind. Do not attempt to modify this unit in
any way and only use the recommended parts for replacement.
The WF-20000 fountain pump should never be run dry as this will cause the
·
unit to overheat and cause permanent damage.
All connections must be earthed.
·
The power cord of this appliance cannot be replaced; if the cord is
·
damaged, the appliance should be discarded. Never cut the cord.
Do not connect to any voltage other than that stated.
·
Do not place in liquids other than water.
·
Do not use with water above 9 F or
·
Do not use with water below 39.2
·
Do not carry or pull the unit by its electrical cable.
·
Do not use this unit if it has a damaged cord, if it is malfunctioning or if it is
·
dropped or damaged in any manner
Do not attempt to modify this unit in any way. Only use attachments and the
·
recommended parts for replacement recommended by the manufacturer.
Before installing, maintaining or handling your equipment, or before placing
·
your hands in your pond, ensure that the unit is disconnected from the
electricity supply.
Always disconnect any electrical devices when not in use.
·
Carefully examine your fountain aeration pump after installation. Do not
·
connect the unit to the mains if there is water on any parts not intended to
be wet.
5°
35°
C.
°F
or 4 .
°C